▲ Redmi Snapdragon 8s new series of phones

This new Redmi phone adopts a straight-screen design without plastic brackets. The chin is slightly wider than the left and right borders, and the overall screen-to-body ratio is close to that of the Redmi K70E phone.

It was reported yesterday that Xiaomi’s phone model 24069RA21C has passed the national 3C quality certification. It is manufactured by Xi’an BYD Electronics and supports 90W wired fast charging.

According to other digital bloggers, this new phone is a new Redmi series product equipped with the Snapdragon 8s Gen 3 processor. It is equivalent to an iterative model of the Redmi Note 12 Turbo. It is equipped with a 5000mAh battery and uses a 1.5K direct screen.

The post Xiaomi Redmi new series of phones front exposed: With Snapdragon 8s Gen 3 SoC appeared first on TechGoing.

According to other digital bloggers, this new phone belongs to Redmi’s new series of products, which is equivalent to the iterative model of Redmi Note 12 Turbo. It will be the first product to be equipped with the Snapdragon 8s Gen 3 processor, equipped with a 5000mAh battery, and uses 1.5K direct screen.

Wang Teng previously said that according to internal calculations, the new 8 Series will cost nearly RMB 1 billion more than the 7 Series, and the pressure is indeed great.

The overseas version of this model is confirmed to be named POCO F6, with model numbers “24069PC21G” and “24069PC21I”, where the former represents the international version and the latter represents the Indian version.

It is found that the IMEI database shows that the internal development codename of POCO F6 is “Peridot”, which is expected to be officially announced in the near future.

▲ Redmi Note 12 Turbo

The post Xiaomi’s new Redmi passed 3C certification, supports 90W fast charging appeared first on TechGoing.

A few days ago, Redmi K70 series three models passed 3C certification, one of them support 90W fast charging and the other two models support up to 120W fast charging.

Snapdragon 8 Gen 3’s CPU peak performance is 30% higher than its predecessor, energy efficiency is 20% higher, and power consumption for the same performance is 34% lower; GPU peak performance is 35% higher, power consumption for the same performance is 38% lower, graphics rendering speed is 25% higher, energy efficiency is 25% higher, and it supports hardware ray tracing, the Unreal 5 engine, the Adreno Frame Motion Engine 2.0 frame insertion technology and 240 FPS gaming. The first OEMs with Snapdragon 8 Gen 3 will include Asus, Honor, iQOO, Meizu, Azera, Nubia, OnePlus, OPPO, realme, Redmi, Red Magic, Sony, Vivo, Xiaomi, Samsung, and ZTE.

Advertisement Disclaimer: The external jump links (including not limited to hyperlinks, QR codes, passwords and other forms) contained in the text are used to convey more information and save selection time, and the results are for reference only.

THIS IS A SPONSOR PROMOTION: >>>>>>>>>>>>>

Geekwills is an online shop that connects consumers with millions of products and brands around the world with the mission to empower them to live their best lives. Geekwills is committed to offering the most affordable quality products to enable consumers and sellers to fulfill their dreams in an inclusive environment.

The post Redmi K70 Series equipped with Snapdragon 8 3gen, Launching Next Month appeared first on TechGoing.

Compared to the Redmi Note 13 Pro +, the Redmi Note 13 Pro features a 6.67-inch ultra-fine quad-narrow edge straight screen, Pro+ same Diamond Bone Architecture, Pro+ same second-generation 1.5K high-gloss eye-protecting screen, with the following specific parameters: 2712×1220 OLED Flexible Straight Screen, TCL Huaxing C7 Luminous Material, Support 120Hz refresh rate,… 240Hz touch sampling rate, 2160Hz instantaneous touch sampling rate, full-screen brightness 500nit, full-screen excitation brightness 1200nit, local peak 1800nit, low brightness 1920Hz high-frequency PWM dimming + high-brightness DC dimming, 12bit color depth, and Rheinland Rhythm Friendly, low-blue-light, and no-strobe certification.

The processor is different, as the Redmi Note 13 Pro is powered by the second-generation Snapdragon 7s mobile platform with Samsung’s 4nm process, complemented by LPDDR4X RAM + UFS 2.2 flash memory (LPDDR5 + UFS 3.1 for the 16+512GB variant), and a 3423mm² graphite homogeneous heat sink.

The Redmi Note 13 Pro comes with Pro+-like imagery, with a 16MP front-facing (Howell OV16A1Q), and a 200MP rear-facing primary camera (Samsung S5KHP3, 1/1.4″, 7P lens) + 8MP ultra wide-angle (Sony IMX355) + 2MP (Howell OV02B10) macro triple camera.

Redmi Note 13 Pro has a built-in 5100mAh ultra-large battery paired with 67W second charging.

Other aspects, Note 13 Pro is 7.98mm thick, weighs 187g, provides four color schemes of midnight black, star sand white, time blue, light dream star river, adopts AG matte glass back cover, equipped with Ruixing Technology 0809 X-axis linear motor, 1012+1216 dual speakers, NFC, infrared remote control, Wi-Fi 5, bluetooth 5.2, IP54 dust and waterproof, and retains 3.5 mm headphone jack, screen fingerprint recognition, and the 3.5 mm headphone jack. mm headphone jack, on-screen fingerprint recognition.

Note 13 Pro pre-sale has been opened, September 26, 10:00 first sale, the first sale of users to send a year of broken screen warranty,

The first sale of the price is as follows (the retail price to add RMB 100):

• 8+128GB first sale RMB 1399
• 8+256GB first sale RMB 1499
• 12+256GB first sale RMB 1699
• 12+512GB first sale RMB 1899
• 16+512GB first sale RMB 1999

Here is a sponsor promotion:

GEEKWILLS

Lenovo TWS Earphone is only $1.99

BUY IT NOW

The post Redmi Note 13 Pro phone released, first sale price starts from RMB 1,399 appeared first on TechGoing.

The blogger revealed that the new Redmi flagship phone will be equipped with a stand-free 2K ultra-narrow straight screen, which will make up for the shortcomings of telephoto in terms of imaging but will not be equipped with wireless charging. Regarding the waterproof issue that netizens are concerned about, the blogger said that Redmi’s short-term goal is to popularize IP68 dustproof and waterproof.

In August this year, Redmi launched its first IP68-rated mobile phone – Redmi K60 Extreme Edition. This mobile phone does not have a screen stand, solving two product pain points in one go. If the news is true, the above two configurations are expected to become standard configurations of Redmi’s main models.

▲ Redmi K60 Extreme Edition, source official website

The released Redmi K60 Extreme Edition mobile phone is also equipped with a 6.67-inch 2712×1220 CSOT C7 OLED direct screen on the front, with a local peak brightness of 2600nit, and supports 144Hz refresh rate and 2880Hz high-frequency PWM dimming. In terms of performance, the phone is equipped with MediaTek Dimensity 9200+ flagship processor and X7 independent graphics chip, with up to 24GB LPDDR5X memory and 1TB UFS 4.0 flash memory.

In addition, the product is also equipped with a 5000mAh battery, 120W fast charging, 50MP Sony IMX800 main camera, X-axis linear motor, NFC, infrared remote control, dual speakers and other configurations.

Here is a sponsor promotion:

GEEKWILLS

Lenovo TWS Earphone is only $1.99

BUY IT NOW

The post Redmi Snapdragon 8 Gen 3 prototype uses metal mid-frame and IP68 appeared first on TechGoing.

The model number of the Redmi K70 Pro in the Geekbench database is 23113RKC6C, which also appeared in the IMEI database in June. The running score platform shows that the motherboard of the K70 Pro is code-named Corot and consists of four 2GHz, three 3GHz and one 3.35GHz cores, corresponding to the MediaTek Dimensity 9200+ chip. In addition, the K70 Pro is equipped with 16GB of memory and is pre-installed with the Android 13 operating system. In Geekbench’s single-core and multi-core tests, the Redmi K70 Pro scored 1,882 and 4,536 points, respectively.

Apart from this information, the benchmark platform did not disclose other phone details. However, it is noticed that the previous blogger @Digital chat station revealed the main specifications of the Redmi K70 Pro. According to him, the phone is powered by the upcoming Snapdragon 8 Gen 3 chip, but this contradicts the information from the benchmark as mentioned above platform. In addition, he also said that the phone will be equipped with a 5120mAh battery and support 120W fast charging technology. In addition, the machine will also use a 2K resolution, 120Hz refresh rate straight screen without plastic brackets.

The post Redmi K70 Pro appeared on Geekbench, Specifications Revealed appeared first on TechGoing.

In the screengrab above, the tipster is seen talking about the “sub-series flagship,” which appears to be the Redmi K70 series. The main flagship series appears to be the Xiaomi 14 lineup.

According to reports, the Snapdragon 8 Gen 2 and Snapdragon 8 Gen 3 chipsets will power the Redmi K70 and K70 Pro, respectively. In the above leak, the tipster seems to be talking about the K70 Pro. He revealed that the device will be equipped with a metallic middle frame and a telephoto camera with 3x optical zoom.

As per other reports, the Redmi K70 Pro may arrive with a 2K resolution display with a flat design and a 5,120mAh battery that supports 120W fast charging. The other details of the smartphone are yet to be revealed.

It is speculated that the 23117RK66C, 2311DRK48C, and 23113RKC6C model numbers are associated with the Redmi K70e, K70, and K70 Pro, respectively. The K70 lineup may debut in November or December this year. The K70 and K70 Pro are expected to get rebranded as the POCO F6 and F6 Pro, respectively, in the global market.

Source

The post Redmi K70 Pro leak reveals metallic frame, 3x telephoto camera appeared first on TechGoing.

In the GB T 4208-2017 enclosure protection level, the waterproof and dustproof level mainly depends on the two digits XX behind IPXX, the first X is the dustproof level from 0 to 6, and the highest level is 6; the second X is the waterproof level From 0 to 8, with 8 being the highest grade. The highest degree of protection is IP68.

Today, IP68 dustproof and waterproof has become a standard feature of flagship mobile phones. Currently, Xiaomi 13 series, Huawei Mate 50 series, Samsung Galaxy S23 series, and Apple iPhone 14 series phones are all equipped with this function.

The Redmi K60 Extreme Edition has been officially announced to be equipped with Dimensity 9200 + processor and X7 independent display chip, and it is also blessed with the new Furious Engine 2.0. In addition, the product screen also supports a 144Hz refresh rate and 1.5K resolution. The Redmi K60 Extreme Edition will also provide a 24GB+1TB large memory version, and the official claims that “more than 70 background applications reside.”

At present, the appearance of the Redmi K60 Extreme Edition has been announced. It provides two colours of shadow blue and black (the name has not yet been announced), and uses an integrated metal DECO. The Yingqing model has a ceramic texture body, and the black model has a carbon fiber texture body without a screen bracket design.

The post Redmi K60 Extreme Edition to come with IP68 dustproof and waterproof appeared first on TechGoing.

News that Redmi Pad SE in the processor, will be downgraded from MediaTek Helio G99 to Qualcomm Snapdragon 680, other hardware specifications are basically the same as Redmi Pad.

Redmi Pad SE’s internal code name is “xun”, will be equipped with a resolution of 1200 * 1920, refresh rate of 90Hz AdaptiveSync 11-inch LCD screen, running Android 13-based MIUI 14 system.

The screen features an 8-bit panel with a peak brightness of 400 nits, a pixel density of 207 ppi, a 16.7 million colour display, a contrast ratio of 1500:1, 70% NTSC coverage, and a screen-to-body ratio of 84.4%.

The tablet features an 8-megapixel primary camera (f / 2.0 aperture) on the back and a 5-megapixel (f / 2.2 aperture) selfie camera on the front with FocusFrame, a feature that automatically tracks the subject and keeps it in the center of the frame during video calls.

The tablet has a built-in 8000mAh battery, supports 10W charging, and has a maximum video playback time of 21 hours and gaming time of 12 hours, according to official data.

The tablet features a metal unibody design, weighs 478 grams and measures 255.53 x 167.08 x 7.36 millimetres.

For connectivity, the device will support USB Type-C port, 3.5mm headphone jack, Wi-Fi 5GHz and Bluetooth 5.0.

The tablet is available in grey, green and purple variants, with the 4GB RAM and 128 GB ROM combo version starting at around 190 euros (currently around RMB 1,511).

More renders can be found at Xiaomiui and appuals.

The post Redmi Pad SE tablet renders revealed, support Snapdragon 680 chip appeared first on TechGoing.

Xiaomi launched the Redmi 12 mobile phone in June this year, which uses a 6.79-inch FHD + resolution LCD screen with a refresh rate of 90Hz. The Redmi 12 has a front-facing 8MP centered single-camera, and a rear-mounted 50MP+8MP+2MP triple-camera.

▲ Image source GSMArena (the same below)

In terms of hardware configuration, Redmi 12 is equipped with a MediaTek Helio G88 chip, which only supports 4G network, and provides a 4/8GB+128/256GB storage combination, and supports microSD card expansion. The battery capacity of the machine is 5000mAh, supports 18W fast charging and side fingerprint recognition, and is equipped with a 3.5mm headphone jack.

The 8GB+128GB version of the Redmi 12 mobile phone is priced at 5,299 baht in Thailand (currently about RMB 1,107), and it is rumoured that its listing price in Europe will be 199 euros (currently about RMB 1,574).

According to the official page information, the appearance and configuration of the Redmi 12 5G mobile phone are basically the same as those of the Redmi 12, including a 50MP main camera, 8GB+256GB storage combination, 5000mAh battery, etc.

In addition, according to Geekbench information, the processor of the Redmi 12 5G may be the Snapdragon 4 Gen 2, and whether there are other differences between the machine and the Redmi 12 other than the processor remains to be officially announced.

The post Redmi 12 5G Phone Officially Announced World Premiere on August 1 appeared first on TechGoing.