Inspur K1 Power K8880G3 new generation server was released a few days ago. It adopts the latest Power10 processor and fully optimizes the system architecture design. The overall performance of the server is 70% higher than that of the previous generation.
Inspur K1 Power K8880G3 supports a maximum of 240 Power10 processor cores, 1920 processor threads, the main frequency of up to 4.15GHz, a single machine supports 64TB high-speed enterprise-level memory, a total memory bandwidth of up to 6.39TB / s, supports 2000 partitions, and has a high Features such as reliability, high security, high performance, and strong data consistency.
The Inspur K1 Power K8880G3 server adopts a highly optimized modular design, which realizes the full redundancy design of core components such as chips, modules, firmware, and operating systems. 3.2 minutes.
▲ Internal structure of Inspur K1 Power K8880G3 server
Inspur K1 Power K8880G3 server also introduces a high-speed serial memory DDIMM design, each group of memory modules is supplied with an independent redundant power supply, and it is claimed that the reliability is much higher than the industry standard DDR memory stick.
Inspur K1 Power K8880G3 server integrates a dedicated fault processing module (FSP), which can intelligently detect, diagnose and isolate potential faulty devices, use the first fault data capture technology to locate the context of random faults, and realize the fault isolation of the smallest hardware unit , to ensure business continuity.
In terms of processing performance, the Power10 processor used in the Inspur K1 Power K8880G3 server integrates 18 billion transistors in a single processor and uses 18 layers of metal stacked wiring. Each processor core runs eight independent hardware threads concurrently, that is, SMT8. The on-chip L3 cache is up to 120MB, and the independent L2 cache per core is up to 2MB, which is 4 times that of the previous generation Power9 processor.
The Inspur K1 Power K8880G3 server further enhances the I/O capability design. The new open OMI memory interface supports up to 64TB of high-speed enterprise-level memory in a single machine, and the memory bandwidth can reach 409GB/s per processor, which is 78% higher than the previous generation, and memory latency is reduced by 36%. Fully supports PCIe5.0 I/O interface, 100% faster than PCIe4.0.
Inspur K1 Power K8880G3 server processor has a main frequency of 4.15GHz. In database application scenarios, it can support higher concurrent processing capabilities and lower service delay, and provide a high-performance computing platform for OLTP transaction systems. The system supports a variety of mainstream enterprise-level operating systems such as AIX, K-UX, and Linux, and can run mixed operating system loads in different partitions.
In terms of security, the Inspur K1 Power K8880G3 server supports full-stack security reinforcement from hardware, firmware, virtualization, and operating system to applications. The system microcode layer and main firmware all support signature authentication and cannot be tampered with. The Inspur K1 Power K8880G3 server also supports a variety of domestic and foreign security certification standards, AES encryption engine on the processor chip, fully homomorphic encryption standard (FHE) and post-quantum encryption standard (PQC), etc., and is equipped with the Inspur K-UX security operating system by default.
The Inspur K1 Power K8880G3 server supports the mixed deployment of various enterprise-level core databases such as traditional commercial databases and open source databases. It provides a vertically scalable platform with strong performance, and it also provides industry-proven primary and backup databases for physical machines and virtualization scenarios. , cluster, high availability, active-active, disaster recovery, two-site three-center and other enterprise-level platform data synchronization solutions, and is compatible with the original Power platform to ensure the continuity of core business and the strong consistency and security of core data.
Inspur officially stated that the system performance of Inspur K1 Power K8880G3 has been improved by 70% compared with the previous generation of products, among which, the single-core integer computing performance has increased by 35%, and the overall integer computing performance has increased by 110%; single-core floating point Computing performance is increased by 85%, and the floating-point computing performance of the whole machine is increased by 175%. In a typical database application scenario, the TPC-C performance of the Inspur K1 Power K8880G3 server is increased by an average of 35% compared with the previous generation’s product. Thanks to the improvement of computing performance, under the same workload, the system energy consumption of the Inspur K1 Power K8880G3 server is reduced by about 30% compared with the previous generation product, and the system energy efficiency is greatly improved.