In October this year, the China Communications Standards Association and the Telecommunication Terminal Industry Association jointly held a press conference on the results of mobile terminal integration and fast charging in Beijing, and released the first batch of 11 fast charging certifications, involving 4 types of terminals, 5 types of adapters and 2 types of devices from 6 companies. Chip products, covering mobile phones, fast charging chips and charging products of Xiaomi, OPPO, Huawei and other manufacturers.

According to Weibo blogger @digital questioning station, the UFCS integrated fast charging protocol has a universal maximum power of 40W. This agreement aims to improve the compatibility of fast charging between different manufacturers. It will be increased to 65W, and the availability will become higher.

The customized red version of OPPO Reno 9 Year of the Rabbit has been on sale before, and the camera module of this new phone is inlaid with the “Ruyi Rabbit” zodiac design. The machine is equipped with Qualcomm Snapdragon 778G chip, supplemented by LPDDR4X+UFS 2.2 storage, but the top configuration is LPDDR5+UFS3.1, and it also has a 6.7-inch 2412×1080 OLED hyperbolic screen, supports 120Hz refresh rate, 2160Hz UHF PWM tuning Light, with 10bit color depth.

In terms of imaging, OPPO Reno9 uses a 32MP Sony IMX709 (RGBW array) on the front, and a 64MP main camera + 2MP black and white dual camera on the rear.

OPPO Reno9 has a built-in 4500mAh battery, supports 67W fast charging, uses a superconducting graphite cooling system, is 7.19mm thick, weighs 174g, supports NFC, infrared remote control, and pre-installs the ColorOS 13 system.

The post OPPO Reno9 Red variant first to receive certification for fusion fast charging capabilities appeared first on TechGoing.

From the official poster, OPPO Reno9 series all front 32 million super-sensitive cat’s eye lens, support autofocus.

The OPPO Reno9 series new launch will be held at 14:30 on November 24. The new OPPO Reno9 series will be officially unveiled and will be available in four colorways, namely Tomorrow Gold, Blue Sea Green, White Moon Black and Microbrew.

At present, the OPPO Reno9 series has hit the e-commerce platform to open reservations. The product page shows that the new device is about 7.19mm thin, 174g light, with a large built-in 4500mAh battery, a double curved symmetrical 3D design, and a new cosmic star ring design for the rear camera, including Polaris lens decoration and starry top luminous design.

According to previous news, OPPO Reno9 is expected to be equipped with Snapdragon 778G chip, a 6.7-inch 2412×1080 resolution 120Hz OLED screen, a rear 64MP + 2MP, and built-in 4500mAh battery with 67W fast charging.

OPPO Reno9 Pro is expected to be equipped with Tiangui 8100-MAX chip, 6.7-inch 2412×1080 OLED resolution 120Hz screen, 50MP (Sony IMX890) + 8MP + Marianas on the rear, 4500mAh battery with 67W fast charging.

OPPO Reno9 Pro+ is expected to be equipped with Snapdragon 8+ Gen 1 chip (3.0GHz version), 6.7-inch 2412×1080 OLED resolution 120Hz screen, 50MP (Sony IMX890, OIS) + 8MP + 2MP + Mariana at the rear, 4700mAh battery with 80W fast charging.

The post OPPO Reno9 series dual-core portrait photography system upgrade: AF autofocus is standard for all series appeared first on TechGoing.

The blogger also revealed that this OPPO mid-range model will feature a centered single-hole curved screen and a rear lens arrangement similar to Reno9 while continuing the Deco design of its predecessor.

The MariSilicon X is OPPO’s self-designed, self-developed image-specific NPU chip, using a 6nm process.

According to previous revelations, the IMX890 is a 50-megapixel sensor with a conventional male outsole, which is expected to be used in the mid-range main camera and secondary camera of the imaging flagship.

In addition, the OPPO Reno9 series is expected to have a Snapdragon 778G + 64MP main camera, as well as a Skyguard 8000 + 50MP Sony IMX 766 configuration.

The post OPPO’s new phone revealed with in-house MariSilicon X chip and IMX890 main camera appeared first on TechGoing.

Suspected OPPO Reno9 real machine exposed (source watermark)

Recently, a digital blogger revealed a set of real pictures of the unpublished new machine, the blogger said that this model belongs to the Ouga system (OPPO/Yi Jia/Realme True Self), from the relevant information speculation, this phone is most likely the OPPO Reno9 series.

As we can see, the front of the phone comes with a curved screen with a center-punched design, the bezels are quite well-controlled and the screen-to-body ratio looks high. Turning our attention to the back, the phone features a triple rear camera with three cameras and flashes in a rectangular distribution, with the flash on the bottom right of the lens module. This design is quite different from the current OPPO Reno8 series and looks quite original.

OPPO Reno9 is a real model (watermark)

According to previous revelations, the OPPO Reno9 series will come with a curved OLED screen with a 120Hz refresh rate and a 64MP main camera.

The post OPPO Reno9 is a real model with a new look and a curved screen appeared first on TechGoing.

Generally speaking, when a manufacturer launches a new phone, it follows the principle of “buy new, not old” and uses a relatively new processor. The new OPPO Reno9 will not follow this “convention”, according to information revealed today by the famous blogger Digital Gossip Station.

It is said that the processor of the OPPO Reno9 will be changed from the SM7450 to the SM7325, which means that instead of the latest Snapdragon 7 Gen 1, it will be powered by the Snapdragon 778G.

Although it looks like a downgrade, the blogger used the word “upgrade”, which is a bit intriguing.

The Snapdragon 7 Gen 1 is a mid-range processor launched by Qualcomm in May this year, with a core architecture consisting of one 2.4GHz A710 mega-core, three 2.36GHz A710 mega-core and four 1.8GHz A510 small-core, using Samsung’s 4nm process.

From its release in May to now, the only two phones with this processor are the OPPO Reno8 Pro and Xiaomi Civi 2. A large number of phones will still use the Snapdragon 778G, and this time the Reno9 also chose to switch to the 778G, which can be said to be quite “disliked”.

The post OPPO Reno9 may switch to Snapdragon 778G processor appeared first on TechGoing.

According to digital blogger @digitalchat, the OPPO Reno9 series will support fusion fast charging technology, have a built-in 4500mAh battery, and come in a new “Marvelous Red” color scheme. As for the processors, the OPPO Reno9 series will be powered by Qualcomm Snapdragon 7 / MediaTek Tiangui 8 series processors. The blogger also says that the Huawei Mate XS2, Xiaomi 11T and iQOO10 Pro phones will also support Fusion Fast Charging technology, with more models to come.

The UFCS (Universal Fast Charging Specification) protocol is a new generation of converged fast charging protocol led by ICT, Huawei, OPPO, Vivo and Xiaomi, in collaboration with a number of terminal and chip companies and industry partners, including Silicon Power, Rexchip, Lihui Technology and Onbao Electronics. The protocol aims to develop a converged fast charging standard for mobile terminals, solve the problem of incompatible inter-matched fast charging, and create a fast, safe and compatible charging environment for terminal users.

OPPO Reno8 Pro

The OPPO Reno8 is equipped with a 6.43-inch 2400×1080 OLED screen with a 90Hz refresh rate, a 4500mAh battery and 80W fast charging support.

OPPO Reno8 Pro with Snapdragon 7 processor, MariSilicon X in-house NPU, 6.62-inch 2400×1080 OLED straight screen, 4500mAh battery and 80W flash charging.

The OPPO Reno8 Pro+ is powered by the MediaTek Tiangui 8100-MAX processor with Marianas MariSilicon X in-house NPU, features a 6.67-inch 2400×1080 OLED flexible straight screen, has a 4500mAh battery and supports 80W flash charging.

The post OPPO Reno9 revealed to have a built-in 4500mAh battery, with Red color scheme appeared first on TechGoing.