According to reports, this M.2 SSD heatsink adopts a design of 4 heat pipes, the heat pipe size is 5mm, and the full electroplating reflow soldering process; it has a built-in 3010 size small fan with a speed of 3500-6000RPM.

ThermalRight said that this M.2 SSD heat sink is designed for the high heat generation characteristics of PCIe 5.0 SSD, and the TPC heat dissipation power consumption can reach 45W. In terms of size, this M.2 SSD heat sink is 90.323.743.8mm, suitable for single-sided or double-sided 2280 specification SSD.

Since the release of PCIe 5.0 SSD, ThermalRight has been obsessed with launching high-performance M.2 SSD coolers and has launched HR09, HR09 PRO, HR10 and other models.

The post ThermalRight launches HR-10 2280 PRO SSD heatsink: with four heat pipes + small fan, Priced 119 CNY appeared first on TechGoing.

This M.2 SSD cooler is described as a 4 heatpipe design with 5mm heatpipes and a fully plated reflow process, and a small 3010 size fan with 3500-6000 RPM built-in.

The M.2 SSD cooler is designed for PCIe 5.0 SSDs with high heat generation and a TPC of up to 45 W. The M.2 SSD cooler measures 90.323.743.8mm and is suitable for single-sided or double-sided 2280 SSDs.

Since the release of PCIe 5.0 SSDs, ThermalRight has been indulging in the launch of high performance M.2 SSD coolers, and has already released a number of them, including the HR09, HR09 PRO and HR10.

The post Thermalright launches HR-10 2280 PRO SSD Cooler: Quad Heatpipe + Small Fan, RMB 119 appeared first on TechGoing.

As shown above, the new version of the fan removes the RGB lighting effect.

The single tower cooler is described as 148mm tall with 4 built-in 6mm anti-gravity heatpipes and nickel-plated processor surface; it is equipped with TL12CW fan, 1550 RPM and S-FDB bearings. The cooler supports Intel LGA 115X / 1200/17XX motherboards and AMD AM4 / AM5 motherboards and comes with TF4 silicone grease.

The Luminous AX120 R SE cooler is priced at $89.9 for the simple white color scheme, for comparison, the version with RGB lighting is currently priced at $109.

The post Thermalright Assassin X 120 SE ARGB cooler adds simple white color scheme appeared first on TechGoing.

According to the official introduction, Thermalright HR-10 2280 cooler adopts high-quality plating reflow technology, a large area heat sink, and built-in dual AGHP inverse gravity heat pipes, which can conduct heat for 2280 solid-state double-sided extremely fast.

Thermalright launched the HR-09 series of M.2 SSD coolers last year, which features AGHP reverse gravity heat pipes with reflow fixed fins and nickel-plated finish throughout. The HR-09 2280 cooler is priced at RMB 79.90 and the HR-09 2280 Pro cooler is priced at RMB 99.

From the specs, this series of M.2 SSD coolers is intended for PCIe 5.0 SSDs. However, PCIe 5.0 SSDs have been delayed time and time again, and only one model from Gigabyte is available in the domestic market so far.

The post ThermalRight Announces HR-10 2280 M.2 SSD Cooler appeared first on TechGoing.

The TR-AM5-A kit is available for TRUE Spirit 90 series, Archon IB-E X2 series, Silver Arrow ITX, TRUE Spirit 140 series and TRUE Spirit 90 series coolers. On the other hand, the TR-AM5-B kit is available for Silver Arrow SB-E series, AXP-200 R, AXP-200 Macho, Archon SB-E and Silver Arrow ITX-R coolers.

Leemin will start selling the new kit later this month for $9.99 (currently about RMB 70).

The post ThermalRight Launches Mounting Kit Supports AMD AM5 / AM4 Motherboards appeared first on TechGoing.

The Phantom PS120SE ARGB radiator has a height of 154mm and built-in seven 6mm AGHP anti-gravity heat pipes to solve the effect of anti-gravity in both vertical and horizontal directions.

The fan equipped with this radiator is TL-C12B-S V2, with a speed of 1500RPM, an air volume of 66.17CFM, and a noise of 25.6DBA. It supports ARGB motherboard lighting effect synchronization.

Elsewhere, this cooler supports Intel LGA 17XX/115X/1200 sockets as well as AMD’s AM4 and AM5 sockets.

The post Thermalright launches Phantom Spirit 120 SE radiator, priced at 229 CNY appeared first on TechGoing.

The case fan uses the standard 8025 sizes, high airflow fan blade design, equipped with S-FDB V2 bearings.

Officials say the fan is acoustically sampled under the system, with micron-level fine-tuning of the fan blades, emphasizing the balance of sound and performance; double-sided silicone feet for better shock absorption protection and shaped lines to strengthen the support strength of the fan frame.

In terms of performance, the fan is officially said to generate 2.7mm H2O air pressure at 2200RPM, with airflow up to 34CFM and 24DBA noise.

The post Thermalright launches 80mm TL-B8 fan: high airflow design, priced at RMB 69.9 appeared first on TechGoing.

According to the introduction, the Thermalright AX90 SE air cooling radiator height is 118mm, and weight is 360g, using Thermalright fins + pure copper heat pipe nickel-plated material, equipped with four 6mm AGHPGEN4 heat pipes, can be pressed DTPC power consumption of 165W.

The Thermalright AX90 SE air cooler is equipped with a standard 9cm fan with 2400 rpm and a low noise level of 27.3dBA.

The Thermalright AX90 SE air cooler supports Intel LGA 115X / 1200/1700 and AMD AM4 / AM5 platforms, which means that the latest Intel 13th generation Core and AMD Raider 7000 series are available.

The post Thermalright AX90 SE 4 heat pipe CPU air-cooled radiator 118mm height on the listed appeared first on TechGoing.