Huawei MatePad Pro 13.2 is the world’s thinnest and lightest large-size tablet, weighing only 580g, 5.5mm thick, and 3.4mm narrow bezels. Equipped with the industry’s first flexible OLED screen, the screen ratio is 3:2, the screen-to-body ratio is 94%, and the resolution is 2880×1920. It supports 144Hz refresh rate, 360Hz touch sampling rate, 1440Hz high-frequency PWM dimming, ΔE<1, and global P3 wide Color gamut, with 1000nits peak brightness, 1,000,000:1 contrast ratio, supports HDR Vivid, full-link Rhine Global Eye Protection 3.0, and supports Huawei’s self-developed natural light display technology. Huawei MatePad Pro 13.2 is available in three colors, namely Yachuan Blue, Crystal White, and Obsidian Black.

Also unveiled with the Huawei tablet are the HUAWEI M-Pencil (third generation), Huawei’s third generation stylus and Huawei MatePad Pro 13.2 inches, which are the world’s first terminal products using StarLight technology. The StarLight pen supports over 10,000 levels of pressure. Sense, the connection is faster and more stable, the latency is as low as 0ms, and it can achieve a professional tablet-level writing and drawing experience. The pen is put down and the ink is drawn out more quickly, and the changes in the strokes are more delicate. In addition, the new machine can also be equipped with a new split smart magnetic global touchpad keyboard.

Huawei MatePad Pro 13.2 is equipped with the same SoC Kirin 9000s as the Mate 60 series, using stainless steel VC + 52000m㎡ high thermal conductivity graphite heat dissipation. It has a built-in 10100mAh battery and supports 88W fast charging. It can be charged to 85% in 40 minutes and fully charged in 65 minutes.

Huawei MatePad Pro 13.2 uses a front 16MP+ToF camera and a rear 13MP+8MP dual camera.

In other aspects, Huawei MatePad Pro 13.2 is equipped with dual-channel 6 speakers (dual high frequency + 4 low frequency), supports spatial audio, has passed HUAWEI SOUND certification, and is equipped with HarmonyOS 4 system.

HUAWEI MatePad Pro 13.2 will be available for pre-sale on September 25, and will go on sale at

 12GB+256GB: 5199 CNY

 12GB+512GB: 5699 CNY

 12GB+1TB: 6699 CNY

 16GB+1TB: 6999 CNY

 16GB+1TB + keyboard + stylus: 8,299 CNY

The HUAWEI M-Pencil (third generation) is priced at 599 CNY, the Huawei Smart Magnetic Keyboard is priced at 899 CNY and the smart leather case is priced at 249 CNY.

The post Huawei MatePad Pro 13.2 Tablet released, starting from 5,199 CNY appeared first on TechGoing.

It is found that the WiFi version of Huawei MatePad Pro 13.2 has appeared on Geekbench. The benchmark information shows that the machine is equipped with the same Kirin 9000s chip as the Mate 60 series, equipped with 12GB of memory, and runs HarmonyOS 4.0.0.116 system compatible with AOSP 12. .

It is worth mentioning that the Geekbench 6.1.0 version used by the tester has not been adapted to hyper-threading when running the score, so it is shown as eight cores. Currently, Geekbench only includes this one running score data, which has no advantage compared with the Mate 60 series. Considering that the heat dissipation of this machine should be stronger than that of mobile phones, it is expected that more and higher running score data will appear in the future.

According to previous reports, this tablet will provide five SKUs, of which the 12G + 256G version is priced at 4,999 CNY, with three colors available: Green, Crystal White, and Black.

 12GB+256GB WiFi version

 12GB+512GB WiFi version

 16GB+1TB WiFi version (stylus + keyboard set)

 12GB+512GB LTE version

 16GB+1TB LTE Collector’s Edition (stylus + keyboard set)

In terms of parameters, the size of the new Huawei MatePad Pro has been upgraded to 13.2 inches, with narrower screen borders and a higher screen-to-body ratio; it first supports StarLight technology, and the connection with the new generation Huawei M-Pencil is faster and more stable.

As you can see from the lower left corner of the poster, Huawei MatePad Pro 13.2-inch tablet will be equipped with StarLight (NearLink) connection technology. Yu Chengdong previously said that compared with traditional wireless connections, Star Flash’s power consumption is reduced to 60%, the data transmission rate is 6 times, the delay is reduced to 1/30, and the number of connections is 10 times.

NearLink is a new generation of wireless short-range communication technology that uses a set of standards to combine the advantages of traditional wireless technologies such as Bluetooth and WIFI. It is suitable for various scenarios such as consumer electronics, smart homes, new energy vehicles, and industrial smart manufacturing. ‏Starlight technology can reduce the communication and interaction delay between Hongmeng ecological terminals to 1/30 of the original, and can also increase the anti-interference capability by 7 dB. The coverage range of signals between devices can also be expanded by 2 times compared with the past. , the number of terminal connections can be increased up to 10 times, and the reliability is increased from the original 90% to 99.99%.

The post Huawei MatePad Pro 13.2-inch tablet appears on Geekbench, with Kirin 9000s chip appeared first on TechGoing.

As you can see from the lower left corner of the poster, the Huawei MatePad Pro 13.2-inch tablet will be equipped with StarLight (NearLink) connection technology. Yu Chengdong previously said that compared with traditional wireless connections, Star Flash’s power consumption is reduced to 60%, the data transmission rate is 6 times, the delay is reduced to 1/30, and the number of connections is 10 times.

In addition, the Huawei MatePad Pro 13.2-inch tablet, as the latest flagship new product, is expected to be equipped with a Kirin 9000S or higher specifications processor, and due to its larger body size, it will perform better in terms of heat dissipation.

Here is a sponsor promotion:

GEEKWILLS

Lenovo TWS Earphone is only $1.99

BUY IT NOW

The post Huawei MatePad Pro 13.2-inch tablet announced, to be equipped with Kirin core appeared first on TechGoing.

After the return of Huawei’s Mate 60 Pro series phones equipped with Kirin 9000S, it attracted various disassembly tests. According to the laboratory analysis conclusion released by the authoritative third-party information platform TechInsights: Huawei’s Kirin 9000S chip is manufactured based on SMIC’s 7nm N+2 process.

After inquiring about the corresponding information it is found that the electron microscope scanning results showed that Kirin 9000S has approximately 980,000 transistors per square millimeter, with a density between TSMC N7P and N6.

On September 5, CCTV’s “News One Plus One” column also conducted an interview and reported that the Vice Chairman of TechInsights analyzed that the chip equipped with Huawei Mate 60 Pro is still 2-2.5 nodes away from the most advanced technology.

In this regard, Lu Tingjie, a professor at Beijing University of Posts and Telecommunications and executive vice chairman of the China Information Economics Society, explained: “2 to 2.5 nodes means that we are still 3 to 5 years behind 5G chips with advanced processes. These 3 to 5 years are the limit of Western countries. Judging by the speed of their technological progress, we in China can often surpass them at China’s speed. But this time we have made progress from 0 to 1. We have finally solved the problem of advanced 5G chips in 5G smartphones, but we must admit that It is still far from the most advanced technology. For example, the upcoming iPhone 15 series has actually used 4-nanometer chips. Our current Huawei Kirin 9000S chip should reach or be close to 7-nanometer technology. But in fact, from 7 nanometers to Going from 5 nanometers to 4 nanometers still requires a long and difficult R&D process, so we can’t be too happy yet. But we did make a very important breakthrough, which is to integrate the most critical chips for smartphones, especially 5G chips. Some of them can be domestically produced.”

In addition, the Vice Chairman of TechInsights used words such as “amazing” and “unexpected” when evaluating Huawei Mate 60 Pro. Lu Tingjie explained: “We have basically achieved localization of 14nm chips before, but we need to Upgrading to 7nm, or even more integrated chips, is not a linear problem, and its complexity will become higher and higher. So they think that China has suddenly conquered 7nm technology in such a short period of time. There must be some very unique technological advancements or solutions. We are also surprised, I feel like this is happening much faster than we thought.”

The post Huawei is developing new HiSilicon Kirin 8000 and 9000 series chipset appeared first on TechGoing.

According to Geek Bay, the Kirin 9000s processor is confirmed to adopt a hyper-threading design, with 8 cores and 12 threads, and the testing tools have been adapted.

According to Zhihu blogger James Aslan, the mid-core and large cores of this processor support hyper-threading.

According to previous reports, running score information shows that the CPU of this processor is composed of 1 2.62GHz core + 3 2.15GHz cores + 4 1.53GHz cores, and integrates the new Maleoon 910 GPU.

Huawei Mate 60 Pro was officially launched a few days ago, with satellite calling for the first time, 12+512GB priced at 6,999 CNY. The standard version of the Huawei Mate 60 phone has also started pre-sale, with a starting price of 5,999 CNY for the 12GB+512GB configuration.

Mate 60 Pro uses a 6.82-inch OLED screen with a screen resolution of FHD+ 2720 × 1260 pixels, supports 1.07 billion colors and P3 wide color gamut, supports 1-120Hz LTPO adaptive refresh rate, and supports under-screen fingerprints.

The Mate60 standard version is equipped with a 6.69-inch single-hole straight screen on the front with a resolution of 2688 × 1216 pixels, supports 1-120Hz LTPO adaptive refresh rate, 1440Hz high-frequency PWM dimming, and 300Hz touch sampling rate.

Huawei’s autumn new product launch is expected to be held on September 12, when details of Huawei’s Kirin 9000S processor should be announced.

The post Kirin 9000S SoC has 8 cores and 12 threads, phone uses hyper-threading appeared first on TechGoing.

The blogger broke the news that the Huawei Mate 50 series will indeed have some Kirin chips, but not Kirin 9000, but Coastalis Kirin 9000S. The picture provided by the blogger shows that the Kirin 9000S chip is provided by Beijing Hai Technology. The blogger said that the Kirin 9000S performance is “no different” from the Kirin 9000, but the amount of Kirin chips is not a lot. Huawei Mate 50 series is still mainly 4G, this can not be changed.

Huawei Mate 50 or equipped with Kirin 9000S

It is worth mentioning that @factorymaster is off students stressed that the content in the picture is not completely finalized, the final release date and the release of the product in the end how to carry or to see the launch.

As for the configuration, the blogger broke the news that the other configurations of the Mate50 series can actually slightly refer to the P50 series, the image did improve some, the chip changed, there is structured light, other parts of the basic accessories are about the same.

The post Huawei Mate 50 may be equipped with Kirin 9000S and Kirin 9000 is no different appeared first on TechGoing.