According to reports, the Alldocube 8.4-inch Android tablet will be powered by MediaTek G99 processor, equipped with 8GB of memory and 256GB of flash memory. The battery capacity is 5000 mAh and supports 18W fast charging.

The screen is 8.4 inches with a resolution of 1920*1200, fully fitted design. The body is designed with a metal back cover, with USB-C, 3.5mm interface and SIM card / TF card slot. In terms of network, this tablet supports 4G full Netcom and dual-band Wi-Fi.

In addition, this tablet supports self-unlocking bl, which can be flashed into a third-party system.

At present, Alldocube has not announced the appearance of the handheld play mini. The picture above shows the 8.4-inch Alldocube iPlay50 mini.

According to previous reports, the MediaTek Helio G99 processor will be released in 2022, based on TSMC’s 6nm process, equipped with 2 Cortex-A76 cores with a maximum frequency of 2.2GHz and 6 Cortex A-55 cores with a maximum frequency of 2GHz , the GPU is Mali-G57 MC2.

The post Alldocube teases 8.4-inch mini tablet, equipped with MediaTek G99 processor appeared first on TechGoing.

Alldocube officials said that the iPlay 50 mini can expand up to 12GB of virtual memory. “When the computer RAM is insufficient, the operating system uses virtual memory to compensate and relieve memory tension. The virtual memory is automatically stored by the hardware and the operating system. information scheduling and management.”

The poster shows that the Alldocube iPlay 50 mini body uses a straight-edge frame, and the system supports free split screens, one screen for multiple purposes, and supports up and down split screens and left and right split screens.

Alldocube iPlay 50 mini uses an 8.4-inch 1920×1200 resolution FHD+ eye-protection narrow edge screen, using in-Cell full lamination process; rear single camera.

Alldocube iPlay 50 mini will support TDD and FDD dual 4G networks, support the direct insertion of 4G SIM cards of the three major telecom operators China Mobile/Unicom/Telecom, and support VoLTE high-definition call function. (Note: The official said that it does not support the use of two telecom SIM cards at the same time, and does not support 2G calls with telecom SIM cards. Telecom SIM cards can be activated for VoLTE for 4G calls.)

Alldocube iPlay 50 mini tablet will also support official protective cases, keyboards, stylus and other accessories.

The post Alldocube iPlay 50 mini tablet debuts at $499, expands up to 12GB virtual memory appeared first on TechGoing.

The poster shows that the Alldocube iPlay 50 mini body uses a straight-edge frame, and the system supports free split screens, one screen for multiple purposes, and supports up and down split screens and left and right split screens.

Alldocube iPlay 50 mini uses an 8.4-inch 1920×1200 resolution FHD+ eye-protection narrow edge screen, using an in-Cell full lamination process; rear single camera.

Alldocube iPlay 50 mini will support TDD and FDD dual 4G networks, support the direct insertion of 4G SIM cards of the three major telecom operators China Mobile/Unicom/Telecom, and support VoLTE high-definition call function. (Note: The official said that it does not support the use of two telecom SIM cards at the same time, and does not support 2G calls with telecom SIM cards. Telecom SIM cards can be activated for VoLTE for 4G calls.)

Alldocube iPlay 50 mini tablet will also support official protective cases, keyboards, stylus and other accessories.

The post Alldocube’s iPlay50 mini will be released on May 23, equipped with ALLDOCUBE OS based Android 13 appeared first on TechGoing.

According to the previous warm-up information, the Alldocube iPlay 50 mini body uses a straight-edge frame and is equipped with a 3.5mm headphone jack.

In terms of system, ALLDOCUBE OS supports free split screen, one screen for multiple purposes, and supports up and down split screen and left and right split screen.

The configuration information of Alldocube iPlay 50 mini tablet as follows:

iPlay 50 mini is equipped with a Unisoc T606 processor, with optional 4GB memory and 64GB flash memory. The screen is an 8.4-inch Incell IPS panel with a resolution of 19201200. The battery is 4000mAh, and the interface includes USB-C, 3.5mm headphone jack, TF slod SIM slot. The overall size is 202.7126*7.5mm, and the weight is 292g.

The post Alldocube iPlay 50 mini tablet will launch on May 15: with 8.4-inch screen, starting at 499 CNY appeared first on TechGoing.

The poster shows that the iPlay 50 mini has a straight-edge bezel and that the system supports free split screen and multi-purpose use, with top and bottom split screen and left and right split screen.

The iPlay 50 mini features an 8.4-inch FHD+ display with 1920×1200 resolution and in-Cell technology, and a single rear camera.

The Alldocube iPlay 50 mini will support TDD and FDD dual 4G networks, support for China Mobile / Unicom / Telecom’s three major telecom operators 4G SIM card direct insertion, as well as support for VoLTE high-definition call function. (Officially, it does not support the use of two telecom SIM cards at the same time, and does not support 2G calls on telecom SIM cards, while telecom SIM cards can be used for 4G calls with VoLTE.)

The ALLDOCUBE iPlay 50 mini will also support the official version of the protective case, keyboard, stylus and other accessories.

The post Alldocube iPlay 50 mini tab announced for May: 8.4-inch full-laminate screen appeared first on TechGoing.

In addition, Alldocube also stated that this system will be pushed to other models in the future.

It is worth mentioning that Alldocube will release the iPlay 50 mini tablet. The tablet will feature an 8.4-inch high-definition display with in-Cell full-fit technology, ultra-narrow bezels, and support for 4G network connections.

On the system, iPlay 50 mini will also usher in an upgrade. The upgrade content includes the system upgrade to the bottom layer of Android 13, which runs more stably and smoothly, supports up and down split screen, left and right split screen and other functions; adds forced horizontal screen function, supports vibrato, etc. App; realize the “parallel window” function, split the screen horizontally, left and right, and display different levels of content of the same software. Support Weibo, Xiaohongshu and other apps. It is not ruled out that the new product of Alldocube is the iPlay 50 mini.

The post Alldocube will push an 8-inch tablet: equipped with the latest upgrade system appeared first on TechGoing.