Renowned digital blogger @Evleaks has shared HD renders of the OPPO Reno 9, Reno 9 Pro and Reno 9 Pro+, all three of which are expected to debut by the end of this month. As the successor to the Reno 8 series, the three Reno 9 phones feature the same design language, but with further refinement and optimization in the details.
The back camera module design is similar on all three phones. However, it is worth noting that the OPPO Reno 9 does not have the words “Powered by MariSilicon”, which indicates that only the Reno 9 Pro and Reno 9 Pro+ will be equipped with OPPO’s own ISP module. In addition, the Reno 9 and Reno 9 Pro have a dual camera setup, while the Pro+ has a triple camera solution.
Reno 9
Reno 9 Pro
Reno 9 Pro+
The Reno 9, 9 Pro and 9 Pro+ models have the same screen size, all with 6.7-inch AMOLED screens that will feature Full HD+ resolution, 120Hz refresh rate, 10-bit color, and an under-display fingerprint scanner.
In terms of performance, the Reno 9, 9 Pro and 9 Pro+ will be powered by Snapdragon 778G, Tiangui 8100-Max and Snapdragon 8 Plus Gen 1 chipsets respectively, while the memory will be up to 16GB of LPDDR5 RAM and the storage will be up to 256GB of UFS 3.1 storage.
In terms of battery, the Reno 9 and 9 Pro will come with a 4,500mAh battery with 67W fast charging support, while the Reno 9 Pro+ will come with a 4,700mAh battery with 80W fast charging support. All three devices will come with the Android 13-based ColorOS 13 UI pre-installed.
In terms of cameras, the Reno 9 will come with a 64MP main camera and a 2MP secondary dual camera setup. the Reno 9 Pro will come with a 50MP Sony IMX890 main camera and an 8MP ultra-wide angle lens.
The Reno 9 Pro+ will feature an OIS-assisted 50MP Sony IMX890 main camera, an 8MP ultra wide-angle lens and a 2MP macro camera. The three Reno 9 models will also feature a 32-megapixel Sony IMX709 front-facing camera.