The Gloway DDR5 high-frequency memory released by Guangwei in July this year is listed. The price of the DDR5-7200 (16GB*2) package is 1499 CNY.
The introduction of Gloway series memory attached is as follows:
Gloway DDR5 7200MHz memory kit is built with Hynix A-Die particles, and its operating timing is as low as CL34 at frequencies up to 7200MHz.
The Gloway series uses thickened 10μm gold fingers to prolong the service life of the memory. Through advanced materials and design, the durability of the gold fingers is greatly enhanced.
The Gloway DDR5 memory released this time uses a 10-layer PCB board with stronger electrical performance on the basis of selecting specially selected Hynix A-Die overclocking particles. According to the official, the 10-layer PCB board is a mature basic configuration for overclocking. It uses an advanced stacking design to stack circuit wiring layers to provide players with unprecedented performance improvements.
In addition, this series of memory adopts a new heat dissipation design, and a copper vapor chamber is added inside the heat sink with a thickness of 2.0mm. The copper sheet is closely attached to the heat-conducting silicone grease, and the heat-conducting performance is combined to provide stronger heat dissipation support when the memory is running at high frequency and manual overclocking. At the same time, both sides of the product use graphics card-level high-performance silicone grease cooling pads, which are close to the heat sink, PCB and particles, and can conduct heat effectively even if they are deeply involved in the thermal battlefield.
